Castle Creations CC BEC 10A 6S Switching Regulator (#010-0004-00)

|
CASTLEBEC
$21.56 $23.95( / )
CC BEC SWITCHING REGULATOR Current Output: Peak: 10 ampsContinuous:<12 volts input = 7 amps*<24 volts input = 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than...
Add to Wishlist
CC BEC SWITCHING REGULATOR
Current Output:
Peak: 10 amps
Continuous:
<12 volts input = 7 amps*
<24 volts input = 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than 5 amp currents are anticipated.
Output Voltage:
Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately).
Input Voltage:
5v to 25.2v (2S to 6S LiPo)
Length:
Width:
Height:
1.2” (30mm)
0.6” (15mm)
0.4” (10mm)
Weight:
0.4 oz (11 grams)
No small animals or interns were harmed in the incredibly long development of this product. Some engineers maybe, but that is a personal matter. They are fine now.

What the heck is a BEC?
Our Battery Eliminator Circuit is a little device that eliminates the need for a receiver and servo battery pack. It draws higher voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.

CC BEC is better because it is smaller, cheaper, and far more powerful.

See the CC BEC User Guide for more details.

 

CC BEC Wiring Diagram

CC BEC MULTI-PACK INSTALLATION

Type: 

ESC Accessories

Vendor: 

Castle Creation

Weight: 

0.0 lb

Customer Reviews

Based on 8 reviews
88%
(7)
0%
(0)
13%
(1)
0%
(0)
0%
(0)
M
Michael Majors

Castle Creations CC BEC 10A 6S Switching Regulator (#010-0004-00)

A
Anthony R.
Castle Creations bec 10A 6s switching regulator

Works good!

T
Timothy Scheiern
castle creations 10a bec

work just as described. It pairs great with the Phoenix edge series esc.as it would with amy other esc w/o bec adjustable with usb link adapter

M
Mike

Works great. Easy setup with the Castle Link. Allows to set the exact voltage you need.

J
Jeff M.

Works as advertised. Set up was easy with the castle link USB cable. I used it to set the exact voltage I wanted to run to my receiver and servos.

r
richard

Really nice BEC, but I had two fail on me trying to use it on a 12S system. Wired it exactly like on Castle Creations website and even spoke to one of the engineers at CC before I went 12s. Works fine for any 3s-6S applications. Gets warm to the touch but never gives out. Used on 6S 600, 6S 500, and 3S 450pro.

D
Derrick

for those of you running or thinking of running this anything larger than a 500-size model, read this from Castle tech:_br /__br /_http://www.castlecreations.com/support/cc_bec_usage_advisory1.html

R
Robert Bokleman

This is a great fit for the Trex 250 DFC/SE. If your using the AR7200BX, use this BEC along with the stock ALIGN ESC/BEC. Just for the CC instructions for eliminating the red wire to the ESC. This upgrade will ensure you DO NOT experience a power cut off with the stock ESC/BEC.

Customer Reviews

Based on 8 reviews
88%
(7)
0%
(0)
13%
(1)
0%
(0)
0%
(0)
M
Michael Majors

Castle Creations CC BEC 10A 6S Switching Regulator (#010-0004-00)

A
Anthony R.
Castle Creations bec 10A 6s switching regulator

Works good!

T
Timothy Scheiern
castle creations 10a bec

work just as described. It pairs great with the Phoenix edge series esc.as it would with amy other esc w/o bec adjustable with usb link adapter

M
Mike

Works great. Easy setup with the Castle Link. Allows to set the exact voltage you need.

J
Jeff M.

Works as advertised. Set up was easy with the castle link USB cable. I used it to set the exact voltage I wanted to run to my receiver and servos.

r
richard

Really nice BEC, but I had two fail on me trying to use it on a 12S system. Wired it exactly like on Castle Creations website and even spoke to one of the engineers at CC before I went 12s. Works fine for any 3s-6S applications. Gets warm to the touch but never gives out. Used on 6S 600, 6S 500, and 3S 450pro.

D
Derrick

for those of you running or thinking of running this anything larger than a 500-size model, read this from Castle tech:_br /__br /_http://www.castlecreations.com/support/cc_bec_usage_advisory1.html

R
Robert Bokleman

This is a great fit for the Trex 250 DFC/SE. If your using the AR7200BX, use this BEC along with the stock ALIGN ESC/BEC. Just for the CC instructions for eliminating the red wire to the ESC. This upgrade will ensure you DO NOT experience a power cut off with the stock ESC/BEC.