Push-in connector 8mm
$4.99
$0.00( / )
ETA:
SizeStandard Nominal width7 mm Tubing insertion depth18.1 mm Mounting positionAny DesignStraight design Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ... 87 psi Temperature-dependent operating pressure-0.095...
- SizeStandard
- Nominal width7 mm
- Tubing insertion depth18.1 mm
- Mounting positionAny
- DesignStraight design
- Pack size10
- Structural designPush-pull principle
- Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa
- Operating pressure for entire temperature range-0.95 bar ... 6 bar
- Operating pressure for entire temperature range-13.775 psi ... 87 psi
- Temperature-dependent operating pressure-0.095 MPa ... 1.4 MPa
- Temperature-dependent operating pressure-0.95 bar ... 14 bar
- Temperature-dependent operating pressure-13.775 psi ... 203 psi
- Information on operating pressureWater: max. 0.6 MPa at max. 50 °C
- Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
- Information on operating and pilot mediaOperation with oil lubrication possible
- Corrosion resistance class (CRC)1 - Low corrosion stress
- LABS (PWIS) conformityVDMA24364-B1/B2-L
- Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
- Ambient temperature-10 °C ... 80 °C
- Product weight9.4 g
- Pneumatic connection 1for pneumatic tubing outside diameter 8 mm
- Pneumatic connection 2for pneumatic tubing outside diameter 8 mm
- Releasing ring colorBlue
- Note on materialsRoHS-compliant
- Housing materialPBT
- Releasing ring materialPOM
- Material of tubing sealNBR
- Material of tube retaining clawHigh-alloy stainless steel